Tri State Hydraulics



Spray Nozzles Fittings 

Spray Nozzles Fittings 

 Alemite Spray Nozzles Fittings
Like spray fittings, spray nozzle fittings convert mist  into a wetter spray. Whenever the required mist flow exceeds the capacity of the maximum spray fitting size, spray nozzle fittings are used. Spray nozzle fittings contain from 1 to 14 flow holes. Each hole passes the  same amount of mist as the largest spray fitting. One end threaded fittings (not shown) are usually installed from inside a very large bearing housing and have a tightening slot on the opposite end. Fittings are brass. 
One end threaded Both ends threaded Number of orifices Total flow area 
(square inch)
CFM @ 20 in. H20
1/2" NPTF(m)  3/4" NPTF(m)  1/4" NPTF(m)  1/2" PTF(m) 
326370-1 383588-1 384280-1 0.00352  0.3 
326370-2  383588-2 384280-2  0.00704  0.6 
326370-3  383588-3  384280-3  0.01056  0.9 
326370-4  383588-4  384280-4  0.01408  1.2 
326370-5  383588-5  384280-5  0.01760  1.5 
326370-6  383588-6  384280-6  0.02112  1.8 
326370-7  383588-7  384280-7  0.02464  2.2 
326370-8  384280-8  0.02816  2.5 
326370-9  384280-9  0.03168  2.8 
326370-10 383617-10 384280-10  10  0.03520  3.1 
383617-11 11  0.03872  3.4 
383617-12 12  0.04224  3.7 
383617-13 13  0.04576  4.0 
383617-14 14  0.04928  4.3 


326370-1

383588-1

384280-1

383588-2

TOOLS & LUBRICATION ALEMITE Oil-Mist Systems Spray Nozzles Fittings