Tri State Hydraulics



PG30/55: Gasoline

GASOLINE PUMP
PG 30 / 55 Series
30-55 cu. in./min.
Gasoline driven

GASOLINE POWER SUPPLY IDEAL FOR REMOTE LOCATIONS. PG30 SERIES FOR TO 75 TON CYLINDERS. PG55 SERIES FOR UP TO 150 TON CYLINDERS.

  • A logical choice at work sites where electricity or compressed air are unavailable. For single- or double-acting cylinders at operating pressures to 10,000 psi.

  • All gasoline engine/hydraulic pumps feature "Posi-Check®" valve to guard against pressure loss when valve is shifted from "advance" to "hold".

PG303 and PG304

  • Powered by a 4-cycle, 2 hp Honda engine giving it the lowest weight to horsepower ratio of all gasoline driven pumps. Has an aluminum reservoir with 375 cu. in. of usable oil.

  • Has same basic pump as PE30 series electric operated pumps.

  • PG30 series pumps are equipped with roll cages to protect pump from damage.

  • PG30 series pumps weigh in at only 35 lbs. with oil.

  • PG303 is for single-acting cylinders, has a 9520 valve with separate internal return line; allows oil from running pump to return to reservoir, independently of cylinder return oil, when valve is in "return" position.

  • PG304 is for double-acting cylinders, has a 9506 4-way (tandem center) valve.

PG553 and PG554

  • 6 hp Intek "Diamond Edge" 4-cycle, by Briggs & Stratton. 5 gallon reservoir.

  • Same basic pump as PE55 series electrical Vanguard® pumps.

  • PG553 has a 9520 3-way valve for single-acting cylinders.

  • PG554 has a 9506 4-way valve for double-acting cylinders.


 

TOOLS & LUBRICATION POWER TEAM SPX HYDRAULIC PUMPS Gasoline Driven PG30/55: Gasoline