Tri State Hydraulics



Intensifiers / Boosters
MODEL 25-OM-DUP-10/10-C & 25-OA-DUP-10/10-C HYDRAULIC BOOSTER

INTRODUCTION:

The Hydraulic Boosters are lightweight, high pressure hydraulic boosters of extremely durable construction. It features a built-in pressure operated valve which automatically allows the return of oil from the line when the motor control valve lever is in the "off" position. This unit is designed to operate equipment with single acting spring return cylinders which will withstand pressures to 10,000 PSI. The 25-OM-DUP Booster is available with nominal dual pressure of 10,000 PSI. 

The two-speed pump unit consists of a low pressure stage and a high pressure stage. Truck oil which is connected to the in port on the pump, supplies oil for
a fast approach. The truck oil also feeds the two high pressure pumps for oil delivery at high pressure.


SPECIFICATIONS

HYDRAULIC MOTOR INPUT OIL REQUIREMENTS:

  • 2.75 GPM net minimum, 5.50 GPM net maximum flow rate

  • 1,000 PSI net minimum, 2,000 PSI net maximum pressure

PUMPING CAPACITY:

  • Low Pressure flow is truck oil bypassed thru pump (approximately)

  • High Pressure flow, 40 cu. in. per minute at 9,500 PSI (based on minimum inputs)

OIL TYPE:
Mineral based fluids, 180 SSU minimum at 100 degree F, 50 SSU at 210 degrees F minimum for best performance

WEIGHT:
29 lbs. (13.2 kg) without case, 35 lbs. (15.9 kg.) with case

IMPORTANT
The booster is "pressure coded" by means of factory installed quick couplers at tool outlet port. Be sure that any equipment connected to the booster has the
adequate working pressure rating for the application.

Refer to "Operating Instructions" for quick coupler coding information.

The booster and any connected equipment being driven by this booster is protected by an internal safety relief valve. The care and adjustment of this valve is covered under "Servicing Instructions".


 

TOOLS & LUBRICATION POWER TEAM SPX HYDRAULIC PUMPS Electric/Hydraulic Pumps Intensifiers / Boosters